Pattern Rolled Surface

Pattern Rolled Stainless Steel and Aluminium sheetmetal with structured surfaces.

These products are mainly used in the elevator, cold storage and ship building industries.

They will satisfy most demands in modern industrial designs and is almost undestructable.

Pattern Rolled sheetmetal have a higher stiffness than conventional flat sheetmetal, thereby thinner sheets could be applied, compared to conventional sheetmetal.

Sheetmetal - type 5 WL

2 WL Sheet

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -1,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -1,0

Sheetmetal - type 2 WL
2 WL sheetmetal

5 WL Sheet

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

Sheetmetal - type 5 WL
5 WL sheetmetal

6 WL Sheet

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

Sheetmetal - type 6 WL
6 WL sheetmetal

Hammerstrike

Material	Width	Length	Thickness mm
Stainless Steel	1000 mm	2000, 2500, 3000 mm	0,3 -1,0
Aluminium	1000 mm	2000, 2500, 3000 mm	0,3 -1,2

Sheetmetal - type hammerstrike
Hammerstrike

10 WG

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

10 WG)

Cambridge

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,3 -1,5
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

Cambridge

Treadtex

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	1,0 -3,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -4,0

Sheetmetal - type Treadtex
TrTreadtex

Engine Turn

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,6 -2,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,6 -3,0

Sheetmetal - type Engine
Engine Turn

7 GM

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,3 -1,5
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -1,5

Sheetmetal - type 7gm
7 GM

Leather

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,3 -2,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

Sheetmetal - type leather
Leather

11 PS

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,3 -1,5
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -2,0

Sheetmetal - type 11ps
11 PS

13SD

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,3 -1,0
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,3 -1,5

Sheetmetal - type 13sd
13SDP

Quilted

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 2700mm	0,3 -0,8
Aluminium	1000, 1250 mm	2000, 2500, 2700 mm	0,3 -1,2

Sheetmetal - type Quilted
Quilted

Velvet

Material	Width	Length	Thickness mm
Stainless Steel	1250 mm	2000, 2500, 3000mm	0,8 -1,5
Aluminium	1250 mm	2000, 2500, 3000 mm	0,8 -1,5

Sheetmetal - type velvet
Velvet

Oxford

Material	Width	Length	Thickness mm
Stainless Steel	1000, 1250 mm	2000, 2500, 3000mm	0,6 -1,5
Aluminium	1000, 1250 mm	2000, 2500, 3000 mm	0,6 -1,5

Sheetmetal - type Oxford
Oxford

Please Note :
The pictures do not display the sheetmetal structure and patterns according to the original scale!

For reason of the high cost of the hand structured sheetmetal, and packaging, these will only be sent at an additional cost of 15,-- Euro each. This amount will be added to the initial order.

For further information, please contact :

Mr. Jacob v. Bremen	Phone : +49 30 789 039 42
	Fax : +49 30 789 03990
	e-mail : info@rotec-berlin.de

To Enquiry